2026 Land Pride RBT3584
Get in Touch
Description
2026 Land Pride RBT3584
Land Pride's RBT35 Series Rear Blades are an excellent choice for leveling, finish grading, and backfilling applications at large feedlots, outdoor arenas, construction sites, nurseries, and maintenance operations on farms, ranches. They are excellent for snow removal in the pulling or the push-blade mode. Their hydraulic or manual angle, offset, and tilt capability make them ideal for construction and maintenance of drainage ditches, waterways, and soil contours. They are also very effective in maintaining silage pit operations.
Features May Include:
- Quick-Hitch Compatible
- Our Quick-Hitch System allows you to quickly connect and disconnect from the implement - most without leaving the tractor seat. This is a real time saver when working on multiple projects.
- 3" Kingpin
- The 3" kingpin on the moldboard is stout enough to hold up to tough tasks.
Info
Industry
Agriculture
Make
Land Pride
Model
RBT3584
Trim
Base
Year
2026
MSRP
N/A
Category
Attachment / Implement
Subcategory
Rear Blades
Specs
Width
Blade: 84 in (2.13 m)
Weight
Approximate: 709 lbs (321.6 kg)
Notes
Parking Stand: Retractable | Mainframe Construction: Fully welded tubular construction | Cutting Edge: 1/2 in x 6 in (1.3 cm x 15.2 cm) Heat treated, replaceable & reversible (double bevel) | Moldboard Thickness: 5/16 in (8 mm) reinforced, 3/16 in (5 mm) tapered reinforcement channel | Moldboard King Pin: 3 in (7.6 cm) diameter | Hydraulic Cylinder: Maximum 20o up and 20o down with blade facing forward or reversed | Blade Tilt Manual Ratchet Jack: Maximum 20o up and 20o down with blade facing forward or reversed | Hitch Type: Cat. 1 & 2 Fits Land Pride Quick Hitch | Maximum G.V.W.: 9500 lbs (4309.1 kg)
Power/Horsepower
Maximum Tractor: 80 horsepower (59.7 kw) for 2 wheel drive, 65 horsepower (48.5 kw) for 4 wheel drive
Blades
Hydraulic Cylinder: Up to 30 inches (76.2 cm) left and right | Offset Manual Linkage: Up to 30 inches (76.2 cm) left and right in 9 positions (center, 4 left, and 4 right) | Blade Angle Manual Linkage:Up to 40o in 10o increments clockwise and counterclockwise |
Cylinders
Tilt Cylinder: 2 in bore x 6 in stroke x 1 1/4 in bore | Offset: 3 1/2 in bore x 14 in stroke x 1 1/4 in rod | Angle: 3 1/2 in bore x 14 in stroke x 1 1/4" rod | Hydraulic: Up to 50 degrees clockwise and counterclockwise
Height
Moldboard: 17 in (43.2 cm) tall
